Westfield MKX2 16

New Products / Westfield / Portable Augers / MKX2 Auger / MKX2 Auger / MKX2 16

Westfield MKX2 16 for sale at Assmans Implement, Inc., Mission, South Dakota

Double tap to zoom

Westfield MKX2 16 for sale at Assmans Implement, Inc., Mission, South Dakota

 

Features

  • New open discharge spout
  • Rigid steel trussing
  • Stable A-frame support
  • Standard steerable axles

 

Options

  • X-Tend hopper
  • Poly flex spout

Specs

MODEL MKX2 16-85 MKX2 16-105 MKX2 16-125
TUBE GAUGE 10 ga 10 ga 10 ga
TUBE CONNECTORS 1/4" (0.6 cm) angle flange 1/4" (0.6 cm) angle flange 1/4" (0.6 cm) angle flange
MAIN FLIGHTING 15" (38.1 cm) x 1/4" (0.6 cm) stretched & welded 15" (38.1 cm) x 1/4" (0.6 cm) stretched & welded 15" (38.1 cm) x 1/4" (0.6 cm) stretched & welded
"WEAR EDGE TECHNOLOGYTM
(REINFORCED FLIGHT)" 1/4" (0.6 cm) main flighting with Wear Edge TechnologyTM on critical grain transfer points 1/4" (0.6 cm) main flighting with Wear Edge TechnologyTM on critical grain transfer points 1/4" (0.6 cm) main flighting with Wear Edge TechnologyTM on critical grain transfer points
AR BOOT FLIGHT 1/4" (0.6 cm) 1/4" (0.6 cm) 1/4" (0.6 cm)
FLIGHTING SHAFT 3.5" (8.9 cm) x 11 ga tubing; square flight connector 3.5" (8.9 cm) x 11 ga tubing; square flight connector 3.5" (8.9 cm) x 11 ga tubing; square flight connector
"GREASELESS HANGER
BEARING FOR BOOT (NEW)" 2 3/8" (6 cm) ID, triple seal 2 3/8" (6 cm) ID, triple seal 2 3/8" (6 cm) ID, triple seal
UPPER BEARING 2" (5.1 cm) taper roller bearing assembly 2" (5.1 cm) taper roller bearing assembly 2" (5.1 cm) taper roller bearing assembly
SPEED REDUCER GEARBOX Enclosed, cast casing, 1000 rpm reducing gearbox (540 rpm) with reversing capability Enclosed, cast casing, 1000 rpm reducing gearbox (540 rpm) with reversing capability Enclosed, cast casing, 1000 rpm reducing gearbox (540 rpm) with reversing capability
TUBE TRUSSING 3.5" (8.9 cm) x 11 ga tubing; 1/2" (1.3 cm) cable stays 3.5" (8.9 cm) x 11 ga tubing; 1/2" (1.3 cm) cable stays 3.5" (8.9 cm) x 11 ga tubing; 1/2" (1.3 cm) cable stays
HYDRAULIC LIFT "2"" (5.1cm) x 4 1/2"" (11.4 cm)
cylinder with 3/8"" (1 cm) cable" 2" (5.1cm) x 6 1/2" (16.5 cm) bore cylinders; 1/2" (1.3 cm) aircraft cable 2" (5.1cm) x 6 1/2" (16.5 cm) bore cylinders; 1/2" (1.3 cm) aircraft cable
UNDERCARRIAGE 4" (10.2cm) x 8" (20.3cm) HSS tubing 4" (10.2cm) x 8" (20.3cm) HSS tubing 4" (10.2cm) x 8" (20.3cm) HSS tubing
AXLE 4" (10.2 cm) x 4" (10.2 cm) x 3/16" (0.5cm) tubing; 4" (10.2 cm) x 4" (10.2 cm) x 1/4" (0.6 cm) on extensions 4" (10.2 cm) x 4" (10.2 cm) x 3/16" (0.5cm) tubing; 4" (10.2 cm) x 4" (10.2 cm) x 1/4" (0.6 cm) on extensions 4" (10.2 cm) x 4" (10.2 cm) x 3/16" (0.5cm) tubing; 4" (10.2 cm) x 4" (10.2 cm) x 1/4" (0.6 cm) on extensions
HUB 8-bolt agricultural type 8-bolt agricultural type 8-bolt agricultural type
TIRES 22.5" (57.2 cm) agricultural tires 22.5" (57.2 cm) agricultural tires 22.5" (57.2 cm) agricultural tires
PTO SHAFT 55E double CV with 2-bolt shear 55E double CV with 2-bolt shear 55E double CV with 2-bolt shear
PARKING JACK 12,000 lbs (5443.1kg) 12,000 lbs (5443.1kg) 12,000 lbs (5443.1kg)
LOW PROFILE HOPPER DIMENSIONS 68" length (172.7 cm) x 48" width (121.9 cm) x 11" height (27.9 cm) 68" length (172.7 cm) x 48" width (121.9 cm) x 11" height (27.9 cm) 68" length (172.7 cm) x 48" width (121.9 cm) x 11" height (27.9 cm)
PSI REQUIRED TO RAISE AUGER 1800 psi (124.1 bar) 1700 psi (117.2 bar) 2000 psi (137.9 bar)
HP REQUIRED (WITH DRY WHEAT) 150 - 175 hp 170 - 200 hp 195 - 225 hp
WHEEL TREAD 148" - 182" (375.9 - 462.3 cm) 148" - 182" (375.9 - 462.3 cm) 148" - 182" (375.9 - 462.3 cm)
TRANSPORT HEIGHT (18" HITCH) 15' 6" (4.7 m) 15' 6" (4.7 m) 17' 6" (5.3 m)

Copyright © 2026 - All Rights Reserved - EquipmentLocator.com

Sitemap | Privacy | Terms