Vermeer T1255III Chain Drive Terrain Leveler

Vermeer T1255III Chain Drive Terrain Leveler for sale at Assmans Implement, Inc., Mission, South Dakota

Double tap to zoom

Vermeer T1255III Chain Drive Terrain Leveler for sale at Assmans Implement, Inc., Mission, South Dakota

 

Features

REMOTE ATTACHMENT CONTROL (RAC)

The T1255III Terrain Leveler® SEM's RAC allows the operator to remotely start and stop the engine, raise/lower the boom and slowly rotate the chain to observe the cutters while standing away from the digging chain during maintenance or service.

TEC PLUS COMPUTER-AIDED CONTROL SYSTEM

Monitor your surface leveler with the exclusive Vermeer TEC® Plus computer-aided control system that communicates with various control modules throughout the machine.

LOAD CONTROL

Load control allows the machine to automatically adjust ground speed to use full engine horsepower, thus maximizing productivity.

ELEVATED, CLIMATE-CONTROLLED CAB

The elevating cab allows superior visibility and added comfort with the air ride seat. The sealed cab has self-contained heating and air conditioning with sound-attenuating foam. It is also a rollover module (ROM).

HIGH WALL CAPACITY

Using a single-drive motor to power the drum allows for the ability to cut an 90-degree high wall compared to the 45-degree high wall when using the dual drive attachment.

OPTIONAL WARRANTY

Vermeer Vantage Track Extended Care Service Program offers an optional 3-year/3000-hour or 5-year/5000-hour warranty on the components of the closed-loop hydrostatic system.

Specs

TRANSPORT DIMENSIONS  
Approach Angle 15 deg
Height Range 146 (370.8 cm)
Length with 50" (127 cm) End Idler and 8 ft (2.44 m) Boom 43 ft
Length with 50" (127 cm) End Idler and 10 ft (3.05 m) Boom 45.5 ft
Length with 50" (127 cm) End Idler and 12 ft (3.66 m) Boom 48 ft
Length with 50" (127 cm) End Idler and 14 ft (4.27 m) Boom (with Restraint Bar) 48.8 ft
Length with 50" (127 cm) End Idler and 16 ft (4.88 m) Boom (with Restraint Bar) 51.3 ft
Length with 50" (127 cm) End Idler and 18 ft (5.49 m) Boom (with Restraint Bar) 53.8 ft
Weight Range 150,000 lb - 205,000 lb (68,039.9 kg - 92,986.4 kg)
Width Ranges 134" (340.4 cm)
ENGINE - OPTION ONE  
Make and Model Caterpillar C18 ACERT Tier 3
Gross Horsepower 600 hp
Rated Engine RPM 2100
Number of Cylinders 6
Fuel Tank Capacity 370 gal
Operating Range 11.6 hours
Fuel Consumption at Full Load 31.8 gph
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35 deg
Air Cleaner Dry-type with precleaner
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
ENGINE - OPTION TWO  
Make and Model Caterpillar C18 ACERT Tier 4 Final
Gross Horsepower 600 hp
Rated Engine RPM 2000
Number of Cylinders 6
Fuel Tank Capacity 370 gal
Operating Range 12.1
Fuel Consumption at Full Load 30.5 gph
Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) 35 deg
Air Cleaner Dry-type with precleaner
Aspiration Turbocharged and air-to-air aftercooled
Cooling Medium Liquid
Electrical System 24 Volt DC
Oil Filter Full flow
TRACKS  
Auto Self Level No
Ground Pressure Minimum 15.5 psi
Ground Pressure Maximum 21.1 psi
Tilt Track Available No
Track Drive Type Dual path hydrostatic with planetary transmission
Track Length 181.5 in
Track Pad Type Double grouser
Track Pad Width Ranges 30" (76.2 cm)
Track Size Cat 375 Excavator
Maximum Ground Speed - Low 48.1 ft/min
Maximum Ground Speed - High 128.4 ft/min
Parking and Emergency Brake spring-applied, hydraulic release, wet disc brake
Service Brakes Hydrostatic
ATTACHMENTS  
Trencher Yes
Terrain Leveler Yes
Rockwheel No
Bucket Wheel No
CAB  
Cab Yes
Control System TEC Plus with SmartTEC
Air Conditioner/Heater Yes
Air Suspension Seat Yes
AM/FM Stereo with Weather Band Yes
Elevating Yes
Pressurized/Filtered Air Yes
Rollover Protective Structure (ROPM) Yes
HYDRAULIC SYSTEM  
Oil Tank Capacity 210 gal
Oil Type HyPower 68, HyPower 100, Hy Power 1100
Pressure Setting 2500 psi
Pump Flow at Maximum RPM 28.7 gpm
Pump Type pressure-and-flow-compensated (load-sensing)