Features
Continuous undermill discharge conveyor system
Designed to handle more production with less clogging, the 36-in (91.4-cm) wide continuous undermill discharge conveyor system offers optimum speed and capacity.
Optional loader cab
An optional loader cab with grapple allows for a one-man operation, which can help reduce labor costs and increase efficiency.
Thrown object restraint system (TORS)
The patented TORS reduces the amount and distance of thrown objects, and has a smooth underside for better material flow.
Series II duplex drum system
The patented Series II duplex drum offers proven cutting performance, and reversible hammers and tips that can nearly double the wear life of single-sided designs and simplify daily maintenance.
Motor starter panel
The motor starter panel provides options to configure a control system that best fits your application – whether that’s a soft-start or VFD panel.
Two electric motors
The TG7000E is powered by two electric motors that deliver a combined 1000 hp (746 kW) to the mill. A separate 60-hp (44.7-kW) electric motor powers the pump for the hydraulic circuits, while a 2-hp (1.5-kW) electric motor powers the an to cool the hydraulic system.
Specs
| GENERAL DIMENSIONS AND WEIGHTS - NON LOADER | |
| Maximum Length - Transport | 48.5 ft |
| Maximum Length - Conveyor Unfolded | 68.8 ft |
| Maximum Width (Transport) | 11.9 ft |
| Maximum Height (Transport) | 11.3 ft |
| Weight - Engine Option One | 70800 lbs |
| Front Mount Pad Weight (Operation) | 26300 lbs |
| Rear Mount Pad Weight (Operation) | 44500 lbs |
| GENERAL DIMENSIONS AND WEIGHTS - LOADER | |
| Maximum Length - Transport | 48.5 ft |
| Maximum Length - Conveyor Unfolded | 68.8 ft |
| Maximum Reach of Loader | 29.5 ft |
| Maximum Width (Transport) | 11.9 ft |
| Maximum Height (Transport) | 144 in |
| Maximum Height - Cab in Operating Position | 18.7 ft |
| Weight - Engine Option One | 82150 lbs |
| Front Mount Pad Weight (Operation) | 49450 lbs |
| Rear Mount Pad Weight (Operation) | 50250 lbs |
| MILL MOTOR | |
| Make and Model | Weg W22 |
| Gross Horsepower (Maximum) | 1000 hp |
| Torque (Max) | 4412 ft-lb |
| Cooling Medium | Air |
| Torque Limiter | PT Tech - Continuously engaged, friction type |
| ELECTRIC FAN MOTOR OPTION 1 - 460 V / 60 HZ | |
| Manufacturer | Weg W22 |
| Frame | NEMA 145T |
| Horsepower | 2 hp |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1750 rpm |
| Enclosure | TEFC |
| Full Load Amps | 261% |
| Locked Rotor Amps | 1960% |
| Service Factor | 1.25 |
| Duty Cycle | S1 |
| NEMA Design | B |
| Insulation Class | F |
| Full Load Torque | 5.9 ft-lb |
| Locked Rotor (%) | 240% |
| Break Down | 300% |
| Ambient Temperature | 40 c |
| Nominal Efficiency | 86.5 (NEMA Premium Efficiency) |
| Power Factor | 84% |
| Approximate Weight | 51 lbs |
| Added Items | Terminal Block, NEMA C-Face Mount |
| Drive Type | Direct |
| ELECTRIC HYDRAULIC MOTOR OPTION 1 - 460 V / 60 HZ | |
| Manufacturer | Weg W22 |
| Frame | NEMA 364/5T |
| Horsepower | 75 hp |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1775 rpm |
| Enclosure | TEFC |
| Full Load Amps | 84.1 |
| Locked Rotor Amps | 538 |
| Service Factor | 1.25 |
| Duty Cycle | S1 |
| NEMA Design | B |
| Insulation Class | F |
| Full Load Torque | 219 ft-lb |
| Locked Rotor (%) | 240% |
| Break Down | 260% |
| Ambient Temperature | 40 c |
| Nominal Efficiency | 95.4 (NEMA Premium Efficiency) |
| Power Factor | 0.86 |
| Approximate Weight | 919 lbs |
| Added Items | Terminal Block, NEMA C-Face Mount |
| Drive Type | Direct |
| LOADER ELECTRIC HYDRAULIC MOTOR OPTION 1 - 460 V / 60 HZ | |
| Manufacturer | Weg W22 |
| Frame | NEMA 404/5T |
| Horsepower | 100 hp |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1775 rpm |
| Enclosure | TEFC |
| Full Load Amps | 111 |
| Locked Rotor Amps | 810 |
| Service Factor | 1.25 |
| Duty Cycle | S1 |
| NEMA Design | B |
| Insulation Class | F |
| Full Load Torque | 292 ft-lb |
| Locked Rotor (%) | 240% |
| Break Down | 260% |
| Ambient Temperature | 40 c |
| Nominal Efficiency | 95.4 (NEMA Premium Efficiency) |
| Power Factor | 0.88 |
| Approximate Weight | 1140 lbs |
| Added Items | Terminal Block, NEMA C-Face Mount |
| Drive Type | Direct |
| ELECTRIC MILL MOTOR OPTION 1 - 460 V / 60 HZ (VFD) | |
| Manufacturer | Weg W22 |
| Frame | NEMA 586/7T |
| Horsepower | 500 hp |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1190 rpm |
| Enclosure | TEFC |
| Full Load Amps | 606 |
| Locked Rotor Amps | 3818 |
| Service Factor | 1 |
| Duty Cycle | S1 |
| NEMA Design | B |
| Insulation Class | F |
| Full Load Torque | 2206 ft-lb |
| Locked Rotor (%) | 220% |
| Break Down | 210% |
| Ambient Temperature | 40 c |
| Nominal Efficiency | 95.8 (NEMA High Efficiency) |
| Power Factor | 0.8 |
| Approximate Weight | 4403 lbs |
| Added Items | Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E. bearing |
| Drive Type | Direct |
| ELECTRIC FAN MOTOR OPTION 2 - 380 V / 50 HZ | |
| Manufacturer | Weg W22 |
| Frame | IEC 90L |
| Horsepower | 2 hp |
| Voltage | 380 |
| Frequency | 50 |
| Phase | 3 |
| Rated Speed | 1445 rpm |
| Enclosure | TEFC |
| Full Load Amps | 3.21 |
| Locked Rotor Amps | 23.8 |
| Service Factor | 1 |
| Duty Cycle | S1 |
| NEMA Design | NM |
| Insulation Class | F |
| Full Load Torque | 7.3 ft-lb |
| Locked Rotor (%) | 230% |
| Break Down | 300% |
| Ambient Temperature | 40 c |
| Nominal Efficiency | 85.6 |
| Power Factor | 0.83 |
| Approximate Weight | 51 lbs |
| Added Items | Terminal Block, NEMA C Face Mount |
| Drive Type | Direct |
| ELECTRIC HYDRAULIC MOTOR OPTION 2 - 380 V / 50 HZ | |
| Manufacturer | Weg W22 |
| Frame | IEC 250S/M |
| Horsepower | 75 hp |
| Voltage | 380 |
| Frequency | 50 |
| Phase | 3 |
| Rated Speed | 1480 rpm |
| Enclosure | TEFC |
| Full Load Amps | 104 |
| Locked Rotor Amps | 778 |
| Service Factor | 1 |
| Duty Cycle | S1 |
| NEMA Design | N |
| Insulation Class | F |
| Full Load Torque | 262 ft-lb |
| Locked Rotor (%) | 280% |
| Break Down | 300% |
| Ambient Temperature | 40 c |
| Nominal Efficiency | 94.7 |
| Power Factor | 0.85 |
| Approximate Weight | 970 lbs |
| Added Items | Terminal Block, NEMA C Face Mount |
| Drive Type | Direct |
| LOADER ELECTRIC HYDRAULIC MOTOR OPTION 2 - 380 V / 50 HZ | |
| Manufacturer | Weg W22 |
| Frame | IEC 280S/M |
| Horsepower | 100 hp |
| Voltage | 380 |
| Frequency | 50 |
| Phase | 3 |
| Rated Speed | 1485 rpm |
| Enclosure | TEFC |
| Full Load Amps | 141 |
| Locked Rotor Amps | 1060 |
| Service Factor | 1 |
| Duty Cycle | S1 |
| NEMA Design | N |
| Insulation Class | F |
| Full Load Torque | 356 ft-lb |
| Locked Rotor (%) | 220% |
| Break Down | 290% |
| Ambient Temperature | 40 c |
| Nominal Efficiency | 95.2 (IE3) |
| Power Factor | 0.85 |
| Approximate Weight | 926 lbs |
| Added Items | Terminal Block, NEMA C Face Mount |
| Drive Type | Direct |
| ELECTRIC MILL MOTOR OPTION 2 - 380 V / 50 HZ (SOFT START) | |
| Manufacturer | Weg W22 |
| Frame | IEC 355M/L |
| Horsepower | 500 hp |
| Voltage | 380 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1190 rpm |
| Enclosure | TEFC |
| Full Load Amps | 743 |
| Locked Rotor Amps | 4680 |
| Service Factor | 1.15 |
| Duty Cycle | S1 |
| NEMA Design | N |
| Insulation Class | F |
| Full Load Torque | 2191 ft-lb |
| Locked Rotor (%) | 220% |
| Break Down | 230% |
| Ambient Temperature | 40 c |
| Nominal Efficiency | 95.7 (IE2) |
| Power Factor | 0.79 |
| Approximate Weight | 4386 lbs |
| Added Items | Terminal blocks; thermostats; inverter duty; D.E. ground brush & insulated N.D.E. bearing |
| Drive Type | Direct |
| ELECTRICAL PANEL (VFD) | |
| Height | 87.4 in |
| Width | 158 in |
| Depth | 24.1 in |
| Weight | 4300 lbs |
| FEED SYSTEM | |
| Tub Table Thickness | .5 in |
| Tub Table Type | T1 Steel |
| Table Tilt Degrees | 92 deg |
| Millbox Opening | 27" x 69" (68.9 cm x 175.3 cm) |
| Inside Diameter of Tub | 10 ft |
| Inside Flare Diameter - At Base of Tub | 10.3 ft |
| Inside Flare Diameter - At Tub Opening | 13 ft |
| Depth of Tub | 4.7 ft |
| Tub Capacity | 15 cu yd |
| Wall Type | T1 Steel |
| Loading Height | 11.4 ft |
| Drive Type | Closed loop hydraulc, continuous sprocket |
| Drive Chain | ANSI #160 roller chain |
| Drive Tensioner | Hydraulic |
| Drive Motor | Hydraulic, low speed/high torque (qty 2) |
| Tub Roller Quantity | 8 carrier, 8 guide (16 total) |
| Tub Speed | 7.2 rpm |
| Tub Agitators | 4 |
| SAFETY SYSTEM | |
| Thrown Object Restraint System | Pivoting tub cover assembly |
| Tub Cover Description | Conical cover wit hhydraulic swing-away |
| Tub Cover Positions | Transport and operate with hydraulic lock |
| Rotor Deflector | Standard |
| Wear Liner Thickness | .5 in |
| Wear Liner Type | AR400 |
| Falling Object Protection at Control Station | Overhead and side protection |
| DUPLEX DRUM | |
| Drum Diameter | 22.5 in |
| Tip Diameter | 31 in |
| Drum Cutting Width | 65.3 in |
| Drum Skin Thickness | 1.5 in |
| Drum Speed | 1190 rpm |
| Tip Speed | 9960 rpm |
| Bearing Type | Double row, spherical roller |
| Bearing - Inner Race Diameter | 5.5 in |
| Bearing - Dynamic Capacity | 145000 lbs |
| Number of Hammers | 10 |
| Number of Cutters | 20 |
| Cutter Block Types | 2 bolt retension with 7/8" (2.2 cm) UNC fasteners, 2.75" (7 cm) and 3.5" (8.9 cm) wide block options |
| Center Retention Pin Dimensions | 2" (5.1 cm) |
| Number of Wipers | 4 |
| SCREENS | |
| Screen Weight | 500 lbs |
| Screen Dimensions | 72.4" x 35.8" x 10.3" (183.9 cm x 91 cm x 21.2 cm) |
| Screen Type | AR400, reversible (qty 2) |
| Breaker Bar Type | T1 steel, replaceable |
| Breaker Bar Dimensions | 2.5" x 4" x 77" (6.4 cm x 10.2 cm x 195.6 cm) |
| Number of Sides | 4 useable edges |
| Screen Area | 4162 sq in |
| Distance - Screen to Millbox Wall | 21.4 in |
| DISCHARGE SYSTEM - SINGLE BELT DESIGN | |
| Length | 24 ft |
| Width | 48 in |
| Belt Design | One piece, 330# with V-cleat |
| Splice | Flexco R2 stainless steel |
| Return Roller Quantity | 6 standard and 2 vibrating roller |
| Idler Roller Diameter | 12 in |
| Idler Roller Bearing | 1- 15/16", 4 bolt flange |
| Standard Drive Roller Diameter | 13.8 in |
| Magnetic Drive Roller Diameter | 13.8 in |
| Drive Motor | Geroler |
| Belt Speed | 960 ft/min |
| Load Height | 14.2 ft |
| HYDRAULIC SYSTEM | |
| Tank capacity | 100 gal |
| Recommended Oil | Hy-Power 68 |
| Filtration Method | In-tank return filters (qty 2) |
| Number of Coolers | 1 |
| IMPLEMENT HYDRAULICS | |
| Components | Conveyor with auxiliary valve |
| System Type | Load sense, pressure compensated |
| Pump Type | Axial piston, variable displacement |
| Pump Flow at Maximum RPM | 34.1 gpm |
| System relief pressure | 3000 psi |
| TUB DRIVE HYDRAULICS | |
| System Type | Closed loop |
| Pump Type | Axial piston, variable displacement |
| Pump Flow at Maximum RPM | 34.1 gpm |
| System relief pressure | 3000 psi |
| Motor Series | Heavy-duty, high torque (qty 2) |
| LOADER HYDRAULICS | |
| System Type | Load sense, pressure compensated |
| Pump Type | Axial piston, variable displacement |
| Pump Flow at Maximum RPM | 52.3 gpm |
| System relief pressure | 3500 psi |
| ELECTRICAL SYSTEM | |
| System Voltage | 24 VDC |
| System Protection | Fused |
| CONTROL STATION | |
| Display Type | LCD multifunction, analog hydraulic gauges |
| Machine Information | Operational, diagnostic, and system parameters |
| Operational Faults | SAE J1939 diagnostic codes |
| Gauges | Auxiliary hydraulic system pressure, tub rotation hydraulic system pressure, conveyor hydraulic system pressure |
| Switches | Moisture proof, toggle switch |
| RADIO REMOTE CONTROL | |
| Display Type | LCD multifunction |
| Motor Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Switches | Sealed membrane |
| Operating Range | 300' (91.4 m) |
| Battery Type | AA (qty 6) |
| Channel Setting | 50 channels |
| LOADER CAB | |
| Display Type | LCD multifunction |
| Engine Information | Yes |
| Motor Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Gauges | Loader hydraulic pressure |
| Switches | Moisture proof, toggle style |
| CHASSIS | |
| Frame Description | Continuous I-beam |
| LOADER | |
| Loader Reach | 29.5 ft |
| Pedestal/Cab Rotation | 370 deg |
| Loader Lift Capacity at Full Reach | 4000 lbs |
| Loader Lift Capacity at 10 ' (3.05 m) | 12000 lbs |
| Grapple Type | Multiple Tine, Continuous 360 Degree Rotation |
| Grapple Weight | 1451 lbs |
| Loader Controls | Pilot operated |
| Climate Controls | A/C and heat |
| Radio | AM/FM, CD and 2.4" (6.1 cm) speakers |
| Window Type | 3/8" (.95 cm) polycarbonate |
| Front Intrusion Guard | 5/8" (1.6 cm) diameter reinforced wire mesh |
| OPTIONAL AIR COMPRESSOR | |
| Air Compressor Brand | Mi-T-M |
| Engine | 7.5 hp (5.6 kW) |
| Maximum Pressure | 175 psi |
| Maximum Air Flow | 23.4 cfm |
| Tank capacity | 30 gal |
| OTHER OPTIONS - TUB GRINDER | |
| Screens | Optional |
| Special Tools Group | Optional |
| Special Paint | Optional |
| Extended Warranty | Optional |
| Preventative Maintenance | Optional |
Copyright © 2026 - All Rights Reserved - EquipmentLocator.com