Features
Series III hard-faced duplex drum
The Series III hard-faced duplex drum offers durability and convenient maintenance, with the ability to remove and replace single hammers and balance the drum externally.
Low sidewalls
Low sidewalls aid in feeding whole trees and other larger material with less restriction, reducing the need for operator interaction with the material.
SmartFeed system
The SmartFeed system monitors engine rpm and adjusts grinding speed for optimal machine performance.
Optional Damage Defense system
The optional Damage Defense system reduces the likelihood of certain metal contaminants from entering the hammermill by reacting to the initial contact with the contaminant and reversing the feed system to allow removal of the contaminant.
Adjustable feed roller
The feed roller can climb up to 50 in (127 cm), helping the machine to crush logs or stumps that need to be rolled, and allowing the operator flexibility for different material inputs.
Optional screen hoist
Change screens easily utilizing the optional screen hoist and the remote control or main machine controls.
Specs
| GENERAL DIMENSIONS AND LENGTHS - LONG INFEED | |
| Maximum Length - Transport | 48.1 ft |
| Maximum Length - Transport with Dolly | 48.6 ft |
| Maximum Length (Operation) | 56.5 ft |
| Maximum Width (Transport) | 10 ft |
| Maximum Width Transport - with Dolly | 10 ft |
| Maxium Height (Transport) | 12 ft |
| Maximum Height Transport with Dolly | 12.8 in |
| Weight | 92000 lbs |
| Tongue Weight - Engine Option 1 with Dolly | 45000 lbs |
| Axle Weight - Engine Option 1 with Dolly | 6000 lbs |
| Weight Engine Option 1 with Dolly | 105000 lbs |
| Dolly Weight | 9500 klbs |
| ENGINE - OPTION ONE | |
| Make and Model | Caterpillar C27 Tier 4F (Stage 4) |
| Number of Cylinders | 12 |
| Gross Horsepower (Maximum) | 950 hp |
| Torque (Max) | 3212 ft-lb |
| Fuel Tank Capacity | 350 gal |
| Max Fuel Consumption | 47.5 gph |
| Fuel Type | Ultra-low sulfur diesel (<15 ppm) |
| Air Cleaner | Dry-type with primary and secondary elements and restriction indicator |
| Oil Filter | Full-flow, spin-on |
| Recommended Oil | CAT DEO-ULS, or API CJ-4, or ACEA E9 (15w-40) |
| Oil Volume with Filter | 71.9 qt |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 45 gal |
| Alternator | 24 Volt |
| Fan | (Qty 2) Variable-speed, reversible |
| Fan - CAC | Hydraulic (variable speed) |
| Clutch Type | Hydraulic-operated wet clutch with PTO |
| Clutch Engagement | Push-button |
| Drive Belt Type | V-belt |
| Sound Power | 120 dB(A) |
| ENGINE - OPTION TWO | |
| Make and Model | Caterpillar C27 Tier 2 (Stage II) |
| Number of Cylinders | 12 |
| Gross Horsepower (Maximum) | 950 hp |
| Torque (Max) | 3212 ft-lb |
| Fuel Tank Capacity | 350 gal |
| Max Fuel Consumption | 47.7 gph |
| Fuel Type | Diesel |
| Air Cleaner | Dry-type with primary and secondary elements and restriction indicator |
| Oil Filter | Full-flow, spin-on |
| Recommended Oil | CAT DEO-ULS, or API CJ-4, or ACEA E9 (15w-40) |
| Oil Volume with Filter | 71.9 qt |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 45 gal |
| Air to Boil Temperatur | 126 deg |
| Alternator | 24 Volt |
| Fan | (Qty 2) Hydraulically driven, reversible |
| Clutch Type | Hydraulic-operated wet clutch with PTO |
| Clutch Engagement | Push-button |
| Drive Belt Type | V-Belt |
| Sound Power | 120 dB(A) |
| STANDARD INFEED SYSTEM | |
| Feed Table Width | 60 in |
| Feed Table Length - Option One | 19 ft |
| Loading Height | 6 ft |
| Flare Construction | Integrated with infeed |
| Feed Conveyor Type | Welded slat chain |
| Drive Type | Radial piston motor |
| Drive Roller Construction | Welded steel |
| Front Idler Roller Construction | Self-cleaning steel auger |
| Infeed Floor Construction | Welded steel with replaceable UHMW wear plates |
| Infeed Roller Width | 56.3 in |
| Feed opening | 38-in (96.5-cm) high x 56.4-in (143.3-cm) wide |
| Infeed roller weight with arm | 2460 lbs |
| Infeed roller weight with arm | 4945 lbs |
| Infeed Roller Diameter | 36.1 in |
| Maximum Feed Height | 50 in |
| Material Type | Fabricated steel |
| Tooth Design | Serrated bars |
| Number of Teeth | 12 |
| Drive Motor | Fixed displacement, geroler |
| Drive Planetary | (Qty 2) 34.2:1 |
| Feed Roller Down Pressure | Adjustable |
| SAFETY SYSTEM | |
| Thrown Object Deflector | Standard |
| Deflector Position | Variable |
| DUPLEX DRUM | |
| Millbox Opening | 60" W x 38" H |
| Drum Weight | 5321 lbs |
| Drum Diameter | 28 in |
| Tip Diameter | 36.4 in |
| Drum Cutting Width | 62.4 in |
| Drum Skin Thickness | 1.5 in |
| Drum Speed | 1200 rpm |
| Bearing Type | Double row, spherical roller |
| Bearing - Inner Race Diameter | 6 in |
| Number of Hammers | 10 |
| Number of Tips | 20 |
| Tip option 1 | 2-bolt |
| Tip types | Premium wide |
| Center Retention Pin Dimensions | 2" dia x 79.35" L |
| CHIP DRUM - 9-IN (22.9-CM) KNIVES | |
| Drum Weight | 6707.5 lbs |
| Depth of Cut | Adjustable: .125 in (.31 cm) to 1 in (2.5 cm) |
| Number of Knives | 14 |
| Knife Thickness | .625 in (1.6 cm) |
| Useable Edges | 1 |
| Material | A8 mod chipper steel |
| Number of Bolts/Knife | 4 |
| Replaceable Threaded Knife Block | Yes |
| Number of Pockets | 14 |
| Shaft diameter | 6.5 in |
| Shaft Retention Type | Keyless bushing |
| CHIP DRUM - 4.5-IN (11.4-CM) KNIVES | |
| Drum Weight | 6707.5 lbs |
| Depth of Cut | Adjustable: 1.125 in (2.86 cm) to 1.5 in (3.81 cm) |
| Number of Knives | 14 |
| Knife Thickness | .625 in (1.6 cm) |
| Useable Edges | 1 |
| Material | A8 mod chipper steel |
| Number of Bolts/Knife | 2 |
| Replaceable Threaded Knife Block | Yes |
| Number of Pockets | 14 |
| Shaft diameter | 6.5 in |
| Shaft Retention Type | Keyless bushing |
| SCREENS | |
| Screen Weight | 470 lbs |
| Screen Dimensions | 1" thick |
| Screen Type | Abrasio-resistant steel |
| Number of Screens | 2 |
| Screen Area | 3583 sq in |
| Millbox lid liner | Abrasion-resistant steel |
| Millbox Lid Liner Dimensions | Abrasion resistant steel |
| Liner Dimensions | .75, 1" (1.9 cm, 2.5 cm) thick |
| Anvil Type | Fabricated steel with replaceable wear surfaces |
| Anvil Dimensions | 6.6" x 18.2" x 81" (16.7 cm x 46.2 cm x 205.7 cm) |
| DISCHARGE SYSTEM - SINGLE BELT DESIGN | |
| Length | 89.3 ft |
| Width | 48 in |
| Belt Design | 3 ply - 330# or straight warp single ply 330# both with V cleat |
| Splice | R2-stainless steel or Super splice |
| Return Roller Quantity | 6 |
| Idler Roller Diameter | 12 in |
| Idler Roller Bearing | 1-15/16, 4-bolt flange |
| Standard Drive Roller Diameter | 12.8 in |
| Magnetic Drive Roller Diameter | 12.8 in |
| Drive Motor | Fixed displacement, geroler |
| Drive Motor Bearings | 1-15/16, 4-bolt flange |
| Belt Speed | 877 ft/min |
| Load Height | 16.3 ft |
| HYDRAULIC SYSTEM | |
| Tank capacity | 100 gal |
| Recommended Oil | Vermeer HyPower 68 |
| Filtration Method | Dual in-tank return filters with suction strainer |
| Number of Coolers | 1 |
| IMPLEMENT HYDRAULICS | |
| System Type | Open-loop, pressure- and flow-compensated |
| Pump Type | Variable displacement, axial piston |
| Pump Flow at Maximum RPM | 63.3 gpm |
| System Relief Pressure | 4200 psi |
| DISCHARGE CONVEYOR HYDRAULICS | |
| System Type | Open-loop, pressure- and flow-compensated |
| Pump Type | Variable displacement, axial piston |
| Pump Flow at Maximum RPM | 32.3 gpm |
| System Relief Pressure | 3000 psi |
| Motor Series | Char-Lyn 6000 Series, geroler |
| FAN DRIVE HYDRAULICS | |
| System Type | Open-loop, pressure compensated |
| Pump Type | Variable displacement, axial piston |
| Pump Flow at Maximum RPM | 25.7 gpm |
| Motor Series | Danfoss KM38 |
| Fan Series - FWD/REV | Reversible |
| CLUTCH | |
| Tank capacity | 21 gal |
| Recommended Oil | Vermeer VMF Gold |
| Filtration Method | Spin-on, pressure filter, B6 = 1000 |
| Number of Coolers | 1 |
| System Type | Open-loop |
| Pump Type | Fixed displacement, gear pump |
| Pump Flow at Maximum RPM | 8.9 gpm |
| System relief pressure | 260 psi |
| ELECTRICAL SYSTEM | |
| System Voltage | 24 VDC |
| Battery | Group 8-D, 1400 CCA (Qty 2) |
| System Protection | Fused |
| CONTROL STATION | |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Gauges | none |
| Switches | Push-button |
| RADIO REMOTE CONTROL | |
| Radio remote type | North America, South America, Japan: R625-60; All other regions: R524-10 |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Switches | Sealed membrane |
| Operating Range | Up to 300' (91.4 m) |
| Battery Type | AA (qty 6) |
| CHASSIS | |
| Frame Description | DT6 |
| Tongue Description | Bolt-on to infeed structure |
| Hitch Type | Fifth wheel |
| Fender Description | Formed steel |
| Brake Type | Air-actuated with spring-applied parking brake |
| Trailer Light Type | 12-24 V LED |
| AXLE/SUSPENSION | |
| Suspension Type | Air-ride |
| Manufacturer - Option One | Hendrickson |
| Capacity per Axle | 20000 lbs |
| Number of Axles | 3 |
| Tires - Option One | 255/70R22.5 Duals |
| Wheels - Option One | 22.5"x8.3" hub-piloted steel |
| Ground Clearance - Option One | 5.3 in |
| Tires - Option Two | 445/50R22.5 LR L (super singles) |
| Wheels - Option Two | Aluminum |
| Ground Clearance - Option Two | 5.3 in |
| TRACKS | |
| Track Frame Description | Rigid frame with reinforced box section. |
| Track Type | D5 double grouser |
| Track Drive Pump Type | Variable displacement, axial piston |
| Track Drive Motor Type | Hydrostatic with planetary transmission |
| Track Brake Type | Spring-applied, hydraulic-release wet disc parking brake |
| Track Length on Ground | 142" (360.7 cm) |
| Track Width - Option One | 26" (66 cm) |
| Track Width Option One - Ground Bearing Pressure - Hard Ground | 58.3 psi |
| Track Width Option One - Ground Bearing Pressure - Soft Ground | 11.4 psi |
| Type of Idler | D5 excavator rollers |
| Number of Idlers | 20 |
| Pump Flow at Maximum RPM | 57.6 gpm |
| System relief pressure | 5000 psi |
| Maximum Speed | 2.8 mph |
| Maximum Creep Speed - (Low) | 1.4 mph |
| OPTIONAL AIR COMPRESSOR | |
| Air Compressor Brand | Mi-T-M |
| Engine | Honda, 11.7 hp |
| Maximum Pressure | 175 psi |
| Maximum Air Flow | 29 cfm |
| Tank capacity (5th wheel) | 30 gal |
| OTHER OPTIONS | |
| Screens | Yes |
| Tips | Yes |
| Special Tools Group | Yes |
| Magnetic discharge conveyor pulley | Yes |
| Extended Warranty | Yes |
| Preventative Maintenance | Yes |
| Special Paint | Yes |
| Air Compressor | Yes |
| Vermeer Confidence Plus Asset Protection Program | Optional |
Copyright © 2026 - All Rights Reserved - EquipmentLocator.com