Features
SmartGrind system
Increase productivity thanks to the exclusive Vermeer SmartGrind system, which automatically controls grinding speed based on engine rpm levels.
Series II duplex drum system
Improve cutting performance using the patented series II duplex drum system with reversible hammers and cutter blocks that simplify maintenance and nearly double wear life.
Top-loading screens
Top-loading screens are designed to give operators easy access.
Thrown object deflector (TOD)
Enhance jobsite safety with a TOD that reduces the quantity and distance of thrown debris.
Drum feature
Diversify your end product by incorporating the fuel chip attachment (FCA), allowing your grinder to be converted to a chipper.
Mobility
The track-driven grinder offers onsite mobility with a remote control for easy maneuverability. The DT6 optional integrated dolly transport system eliminates the need for a dedicated trailer to move between sites.
Specs
| GENERAL DIMENSIONS AND LENGTHS - LONG INFEED | |
| Maximum Length - Transport | 37.3 ft |
| Maximum Length - Transport with Dolly | 45.8 ft |
| Maximum Length (Operation) | 54.5 ft |
| Maximum Width Transport - with Dolly | 9.8 ft |
| Maximum Height Transport with Dolly | 154.8 in |
| Weight | 75000 lbs |
| Tongue Weight - Engine Option 1 with Dolly | 37590 lbs |
| Axle Weight - Engine Option 1 with Dolly | 48910 lbs |
| Dolly Weight | 9500 lbs |
| ENGINE - OPTION ONE | |
| Make and Model | Caterpillar C18 Tier 4F (Stage IVB) |
| Number of Cylinders | 6 |
| Gross Horsepower (Maximum) | 755 hp |
| Torque (Max) | 2582 ft-lb |
| Fuel Tank Capacity | 350 gal |
| Max Fuel Consumption | 38.3 gph |
| Fuel Type | Ultra-low sulfur diesel (<15 ppm) |
| Air Cleaner | Dry-type with primary and secondary elements and restriction indicator |
| Oil Filter | Full-flow, spin-on |
| Recommended Oil | API CJ-4, 15W-40 |
| Oil Volume with Filter | 36 qt |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 22.6 gal |
| Alternator | 24 Volt |
| Fan | (Qty 2) Hydraulically driven, reversible |
| Fan - CAC | Hydraulic (variable speed) |
| Clutch Type | Hydraulic-operated wet clutch with PTO |
| Clutch Engagement | Push-button |
| Drive Belt Type | Synchronous, carbon fiber |
| ENGINE - OPTION TWO | |
| Make and Model | Caterpillar C18 Tier 4i (Stage IIIB) |
| Number of Cylinders | 6 |
| Gross Horsepower (Maximum) | 755 hp |
| Torque (Max) | 2582 ft-lb |
| Fuel Tank Capacity | 350 gal |
| Max Fuel Consumption | 39.5 gph |
| Fuel Type | Ultra-low sulfur diesel (<15 ppm) |
| Air Cleaner | Dry-type with primary and secondary elements and restriction indicator |
| Oil Filter | Full-flow, spin-on |
| Recommended Oil | API CJ-4, 15W-40 |
| Oil Volume with Filter | 36 qt |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 22.6 gal |
| Air to Boil Temperatur | 118 deg |
| Alternator | 24 Volt |
| Fan | (Qty 2) Hydraulically driven, reversible |
| Clutch Type | Hydraulic-operated wet clutch with PTO |
| Clutch Engagement | Push-button |
| Drive Belt Type | Synchronous, carbon fiber |
| Sound Power | 119.8 dB(A) - deluxe exhaust system (Exhaust option 2 move to engine option one |
| ENGINE - OPTION THREE | |
| Make and Model | Caterpillar C18 Tier 3 |
| Number of Cylinders | 6 |
| Gross Horsepower (Maximum) | 630 hp |
| Torque (Max) | 2041 ft-lb |
| Fuel Tank Capacity | 350 gal |
| Max Fuel Consumption | 34.6 gph |
| Fuel Type | Diesel |
| Air Cleaner | Dry-type with primary and secondary elements and restriction indicator |
| Oil Filter | Full-flow, spin-on |
| Recommended Oil | API CJ-4, Viscosity dependent on startup temperature |
| Oil Volume with Filter | 36 qt |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 21.3 gal |
| Alternator | 24 Volt |
| Fan | (Qty 2) Hydraulically driven, reversible |
| Clutch Type | Hydraulic operated wet clutch with PTO |
| Clutch Engagement | Push-button |
| Drive Belt Type | Synchronous, carbon fiber |
| Sound Power | 119.8 dB(A) - Deluxe exhaust system |
| STANDARD INFEED SYSTEM | |
| Feed opening | 32-in (81.3-cm) high x 56.4-in (143.3-cm) wide |
| Infeed roller weight with arm | 3350 lbs |
| HEAVY-DUTY INFEED SYSTEM | |
| Feed opening | 32-in (81.3-cm) high x 56.4-in (143.3-cm) wide |
| Infeed roller weight with arm | 3483 lbs |
| SAFETY SYSTEM | |
| Thrown Object Deflector | Standard |
| Deflector Position | Variable |
| DUPLEX DRUM | |
| Millbox Opening | 60" W x 32" H (152.4 cm W x 81.3 cm H) |
| Drum Weight | 4741 lbs |
| Drum Diameter | 28 in |
| Tip Diameter | 36.4 in |
| Drum Cutting Width | 62.4 in |
| Drum Skin Thickness | 1.5 in |
| Drum Speed | 1086 rpm |
| Bearing Type | Double row, spherical roller |
| Bearing - Inner Race Diameter | 5.5 in |
| Number of Hammers | 10 |
| Number of Tips | 20 |
| Tip types | Premium wide |
| Center Retention Pin Dimensions | 2" diameter x 75.3" L (5.1 cm diameter x 191.3 cm L) |
| CHIPPER DRUM | |
| Millbox Opening | 60 |
| Drum Weight | 5946 lbs |
| Drum Diameter | 34.3 in |
| Drum Cutting Width | 63 in |
| Drum Skin Thickness | 1.5 in |
| Depth of Cut | Adjustable: .125 in (.31 cm) to 1 in (2.5 cm) |
| Number of Knives | 28 |
| Knife Thickness | .625 in (1.6 cm) |
| Useable Edges | 1 |
| Material | A8 mod chipper steel |
| Number of Bolts/Knife | 2 |
| Replaceable Threaded Knife Block | Yes |
| Number of Pockets | 14 |
| Drum Speed | 683 rpm |
| Bearing Type | Spherical |
| Bearing - Inner Race Diameter | 5.5 in |
| Shaft diameter | 6.5 in |
| Shaft Retention Type | Keyless bushing |
| SCREENS | |
| Screen Weight | 470 lbs |
| Screen Dimensions | 3/4" (1.9 cm) thick |
| Screen Type | Fabricated out of abrasion resistant steel |
| Number of Screens | 2 |
| Screen Area | 3317 sq in |
| Millbox lid liner | Abrasion-resistant steel |
| Number of Sides | 1 |
| Millbox Lid Liner Dimensions | Abrasion resistant steel |
| Liner Dimensions | 1" thick x 5.6" W x 65.4" L (2.5 cm thick x 14.2 cm W x 166.1 cm L) |
| Anvil Type | Fabricated steel with replaceable wear surfaces |
| Anvil Dimensions | 22.8"x 4.1"x 80.8" (57.9 cm x 10.4 cm x 205.2 cm) |
| DISCHARGE SYSTEM - SINGLE BELT DESIGN | |
| Length | 81.3 ft |
| Width | 48 in |
| Belt Design | 3 ply - 330# or straight warp single ply 330# both with V cleat |
| Splice | R2-stainless steel or Super splice |
| Return Roller Quantity | 4 |
| Idler Roller Diameter | 12 in |
| Idler Roller Bearing | 1-15/16, 4-bolt flange |
| Standard Drive Roller Diameter | 12.8 in |
| Magnetic Drive Roller Diameter | 12.8 in |
| Drive Motor | Fixed displacement, geroler |
| Drive Motor Bearings | 1-15/16, 4-bolt flange |
| Belt Speed | 780 ft/min |
| Load Height | 14 ft |
| HYDRAULIC SYSTEM | |
| Tank capacity | 100 gal |
| Recommended Oil | Vermeer HyPower 68 |
| Filtration Method | Dual in-tank return filters with suction strainer |
| Number of Coolers | 2 (Implement/Track) |
| IMPLEMENT HYDRAULICS | |
| System Type | Open-loop, pressure- and flow-compensated |
| Pump Type | Variable displacement, axial piston |
| Pump Flow at Maximum RPM | 32.4 |
| System Relief Pressure | 4500 psi |
| DISCHARGE CONVEYOR HYDRAULICS | |
| System Type | Open-loop |
| Pump Type | Fixed displacement, gear pump |
| Pump Flow at Maximum RPM | 25.7 gpm |
| System Relief Pressure | 3000 |
| Motor Series | Char-Lyn 6000 Series, geroler |
| FAN DRIVE HYDRAULICS | |
| System Type | Open-loop, pressure- and flow-compensated |
| Pump Type | Variable displacement, axial piston |
| Pump Flow at Maximum RPM | 36.2 gpm |
| Motor Series | Radiator-Permco M197 Series; CAC-Turolla OCG SNM2 Series |
| Fan Series - FWD/REV | Reversible |
| CLUTCH | |
| Tank capacity | 18 gal |
| Recommended Oil | VMF Gold |
| Filtration Method | Spin-on, pressure filter, B6 = 1000 |
| Number of Coolers | 1 |
| System Type | Open-loop |
| Pump Type | Fixed displacement, gear pump |
| Pump Flow at Maximum RPM | 12.4 gpm |
| System relief pressure | 260 psi |
| ELECTRICAL SYSTEM | |
| System Voltage | 24 Volt |
| Battery | Group 8-D, 1155 CCA (Qty 2) |
| System Protection | Fused |
| CONTROL STATION | |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Gauges | Two, fuel level and hydraulic pressure |
| Switches | Moisture-proof, toggle style |
| RADIO REMOTE CONTROL | |
| Radio remote type | R524 |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Switches | Sealed membrane |
| Operating Range | Up to 300' (91.4 m) |
| Battery Type | AA (qty 6) |
| Channel Setting | 50 channels |
| CHASSIS | |
| Frame Description | Unit body construction |
| Tongue Description | Bolt-on to infeed structure |
| Hitch Type | Fifth wheel |
| Fender Description | Optional bolt-on formed steel |
| Brake Type | Air-actuated with spring-applied parking brake |
| Trailer Light Type | 12-24 V LED |
| AXLE/SUSPENSION | |
| Suspension Type | Air-ride |
| Manufacturer - Option One | Hendrickson |
| Capacity per Axle | 20000 lbs |
| Number of Axles | 3 |
| Tires - Option One | 255/70R22.5 Duals |
| Wheels - Option One | 22.5"x 8.3" (57.2 cm x 21 cm) Hub piloted steel |
| Ground Clearance - Option One | 5.3 in |
| TRACKS | |
| Track Frame Description | Rigid frame with reinforced box section. |
| Track Type | D5 double grouser |
| Track Drive Pump Type | SauerDanfoss Series H1 |
| Track Brake Type | Multidisk parking brake (spring activated) |
| Track Length on Ground | 142" (360.7 cm) |
| Track Width - Option One | 26" (66 cm) |
| Track Width Option One - Ground Bearing Pressure - Hard Ground | 55.6 psi |
| Track Width Option One - Ground Bearing Pressure - Soft Ground | 10.2 psi |
| Track Width Option Two - Ground Bearing Pressure - Option | 13.2 psi |
| Track Width Option Two - Ground Bearing Pressure - Option Two | 72.2 psi |
| Type of Idler | D5 excavator rollers |
| Number of Idlers | 20 |
| Pump Flow at Maximum RPM | 43 gpm |
| System relief pressure | 5000 psi |
| Maximum Speed | 2.6 mph |
| Low Speed Travel in Creep Mode | 1 mph |
| OPTIONAL AIR COMPRESSOR | |
| Air Compressor Brand | Mi-T-M |
| Engine | Honda, 11.7 hp (8.7 kW) |
| Maximum Pressure | 175 psi |
| Maximum Air Flow | 29 cfm |
| Tank capacity (5th wheel) | 30 gal |
| OTHER OPTIONS | |
| Screens | Yes |
| Tips | Yes |
| Special Tools Group | Yes |
| Magnetic discharge conveyor pulley | Yes |
| Extended Warranty | Yes |
| Preventative Maintenance | Optional |
| Special Paint | Yes |
| Air Compressor | Optional |
| Vermeer Confidence Plus Asset Protection Program | Optional |
Copyright © 2026 - All Rights Reserved - EquipmentLocator.com