Features
Two electric motors
The HG6000E is powered by two electric motors that deliver a combined 600 hp (447 kW) to the mill. A separate 60-hp (44.7-kW) electric motor powers the pump for the hydraulic circuits, while a 2-hp (1.5-kW) electric motor is used to cool the hydraulic system.
Motor starter panel
The motor starter panel provides options to configure a control system that best fits your application - whether that’s a soft-start or VFD panel.
Series II duplex drum system
Improve cutting performance using the patented Series II duplex drum system designed with reversible hammers and tips to help reduce daily maintenance and nearly double wear life.
Dedicated chip drum
For enhanced flexibility with the HG6000E, a dedicated chip drum – adjustable for product size ranging from .125 in to 1.5 in (3.2 mm to 38.1 mm) - is available.
Open-ended, wide infeed tables
Maximize loading speed and productivity using the patented SmartGrind system and hydraulic feed roller down pressure. Open-ended, wide infeed tables are designed to make over-the-side loading easy and efficient.
Thrown object deflector (TOD)
Reduce the quantity and distance of thrown material debris with the TOD, strategically placed to reduce interference when loading over-length material.
Specs
| GENERAL DIMENSIONS AND LENGTHS - LONG INFEED | |
| Maximum Length - Transport | 45.8 ft |
| Maximum Length (Operation) | 54.5 ft |
| Maximum Width Transport - with Dolly | 9.8 ft |
| Weight | 56000 lbs |
| Tongue Weight - Engine Option 1 with Dolly | 21600 lbs |
| Axle Weight - Engine Option 1 with Dolly | 43400 lbs |
| Dolly Weight | 9500 lbs |
| GENERAL DIMENSIONS AND WEIGHTS- SKID MOUNT WITH LONG INFEED | |
| Weight | 55500 lbs |
| Rear Pad Weight | 31600 lbs |
| Front Pad Weight | 23900 lbs |
| ELECTRIC FAN MOTOR OPTION ONE - 60 HZ | |
| Manufacturer | WEG W22 |
| Frame | 145T |
| Horsepower | 2 hp |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1750 rpm |
| Enclosure | TEFC |
| Full Load Amps | 2.61 |
| Locked Rotor Amps | 19.6 |
| Service Factor | 1.25 |
| Duty Cycle | S1 |
| NEMA Design | B |
| Insulation Class | F |
| Full Load Torque | 5.9 ft-lb |
| Locked Rotor (%) | 240 |
| Break Down | 300 |
| Ambient Temperature | 40 c |
| Nominal Efficiency | 86.5 |
| Power Factor | 0.84 |
| Approximate Weight | 51 lbs |
| Added Items | Terminal Block |
| ELECTRIC HYDRAULIC MOTOR OPTION ONE - 60 HZ | |
| Manufacturer | WEG W22 |
| Frame | 364/5TS |
| Horsepower | 60 hp |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1775 rpm |
| Enclosure | TEFC |
| Full Load Amps | 68.3 |
| Locked Rotor Amps | 451 |
| Service Factor | 1.25 |
| Duty Cycle | S1 |
| NEMA Design | B |
| Insulation Class | F |
| Full Load Torque | 175 ft-lb |
| Locked Rotor (%) | 240 |
| Break Down | 260 |
| Ambient Temperature | 40 c |
| Nominal Efficiency | 95 |
| Power Factor | 0.87 |
| Approximate Weight | 869 lbs |
| Added Items | Nema C Face Mount, Terminal Block |
| ELECTRIC MILL MOTOR OPTION ONE - 60 HZ | |
| Manufacturer | WEG W22 |
| Frame | NEMA 586/7Z |
| Voltage | 460 |
| Frequency | 60 |
| Phase | 3 |
| Rated Speed | 1790 rpm |
| Enclosure | TEFC |
| Full Load Amps | 401 |
| Locked Rotor Amps | 2390 |
| Service Factor | 1.15 |
| Duty Cycle | S1 |
| NEMA Design | NEMA A |
| Insulation Class | F |
| Full Load Torque | 1373 ft-lb |
| Locked Rotor (%) | 220 |
| Break Down | 260 |
| Ambient Temperature | 4 c |
| Nominal Efficiency | 95.8 |
| Power Factor | 0.85 |
| Approximate Weight | 3363 lbs |
| Added Items | Temperature switch; Inverter duty; Terminal Block |
| Drive Belt Type | Synchronous, carbon fiber |
| ELECTRICAL PANEL | |
| Height | 87.4 in |
| Width | 158 in |
| Depth | 24.1 in |
| Weight | 4100 lbs |
| STANDARD INFEED SYSTEM | |
| Feed Table Width | 60 in |
| Feed Table Length - Option One | 20 in |
| Loading Height | 7.6 ft |
| Flare Construction | Integrated with infeed |
| Feed Conveyor Type | Welded slat chain |
| Material Construction | steel |
| Drive Type | Radial piston motor |
| Drive Roller Construction | Welded steel |
| Front Idler Roller Construction | Self-cleaning steel auger |
| Infeed Floor Construction | Welded steel with replaceable UHMW wear plates |
| Infeed Roller Width | 56.8 in |
| Infeed Roller Weight | 1300 lbs |
| Infeed Roller Diameter | 36.1 in |
| Maximum Feed Height | 32 in |
| Material Type | Fabricated steel |
| Tooth Design | Serrated bars |
| Number of Teeth | 13 bars |
| Drive Motor | Fixed displacement, Geroler |
| Drive Planetary | Two options (HD - 26.18:1) (STD - 34.2:1) |
| Feed Roller Down Pressure | Adjustable |
| SAFETY SYSTEM | |
| Thrown Object Deflector | Standard |
| Deflector Position | Variable |
| DUPLEX DRUM | |
| Millbox Opening | 60" W x 32" H (152.4 cm W x 81.3 cm H) |
| Drum Diameter | 5600 in |
| Tip Diameter | 28 in |
| Drum Cutting Width | 36.4 in |
| Drum Skin Thickness | 1.5 in |
| Drum Speed | 1080 rpm |
| Bearing Type | Double row, spherical roller |
| Bearing - Inner Race Diameter | 5.5 in |
| Number of Hammers9 | 10 |
| Number of Tips | 20 |
| Center Retention Pin Dimensions | 2" diameter x 75.3" L (5.1 cm diameter x 191.3 cm L) |
| SCREENS | |
| Screen Weight | 470 lbs |
| Screen Dimensions | 3/4" (1.9 cm) thick |
| Screen Type | Fabricated out of abrasion-resistant steel |
| Number of Screens | 2 |
| Screen Area | 3317 sq in |
| Number of Sides | 1 |
| Millbox Lid Liner Dimensions | Abrasion-resistant steel |
| Liner Dimensions | 1" thick x 5.6" W x 65.4" L (2.5 cm thick x 14.2 cm W x 166.1 cm L) |
| Anvil Type | Fabricated steel with replaceable wear surfaces |
| Anvil Dimensions | 22.8"x 4.1"x 80.8" (57.9 cm x 10.4 cm x 205.2 cm) |
| DISCHARGE SYSTEM - SINGLE BELT DESIGN | |
| Length | 81.3 ft |
| Width | 48 in |
| Belt Design | 3 ply - 330# or straight warp single ply 330# both with V cleat |
| Splice | R2-stainless steel or Super splice |
| Return Roller Quantity | 3 |
| Idler Roller Diameter | 12 in |
| Idler Roller Bearing | 1-15/16, 4-bolt flange |
| Standard Drive Roller Diameter | 12.8 in |
| Magnetic Drive Roller Diameter | 12.8 in |
| Drive Motor | Fixed displacement, Geroler |
| Drive Motor Bearings | 1-15/16, 4-bolt flange |
| Belt Speed | 780 ft/min |
| Load Height | 14.5 ft |
| HYDRAULIC SYSTEM | |
| Tank capacity | 65 gal |
| Recommended Oil | Vermeer HyPower 68 |
| Filtration Method | Dual in-tank return filters with suction strainer |
| Number of Coolers | 1 |
| IMPLEMENT HYDRAULICS | |
| System Type | Open-loop, pressure and flow compensated |
| Pump Type | Variable displacement, axial piston |
| Pump Flow at Maximum RPM | 28.5/27.3 (60Hz/50Hz) |
| System Relief Pressure | 4500 |
| DISCHARGE CONVEYOR HYDRAULICS | |
| System Type | Open-loop |
| Pump Type | Fixed displacement, gear pump |
| Pump Flow at Maximum RPM | 23 gpm |
| System Relief Pressure | 3000 |
| Motor Series | Char-Lyn 6000 Series, Geroler |
| ELECTRICAL SYSTEM | |
| System Voltage | 24V Machine Control Circuit |
| System Protection | Fused |
| CONTROL STATION | |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | Yes |
| Operational Faults | Yes |
| Switches | Moisture-proof, toggle style |
| RADIO REMOTE CONTROL | |
| Display Type | LCD |
| Engine Information | Yes |
| Machine Information | yes |
| Operational Faults | Yes |
| Switches | Sealed membrane |
| Operating Range | Up to 300' (91.4 m) |
| Battery Type | AA (qty 6) |
| Channel Setting | 50 channels |
| CHASSIS | |
| Frame Description | Unit body construction |
| Tongue Description | Bolt-on to infeed structure |
| Hitch Type | Fifth wheel |
| Fender Description | Formed steel, Replaceable |
| Brake Type | Air-actuated with spring-applied parking brake |
| Trailer Light Type | 12-24 V LED |
| AXLE/SUSPENSION | |
| Suspension Type | Air-ride |
| Manufacturer - Option One | Hendrickson |
| Capacity per Axle | 20000 lbs |
| Number of Axles | 3 |
| Tires - Option One | 255/70R22.5 Duals |
| Wheels - Option One | 22.5"x 8.3" (57.2 cm x 21 cm) Hub piloted steel |
| Ground Clearance - Option One | 5.3 in |
| OPTIONAL AIR COMPRESSOR | |
| Air Compressor Brand | Mi-T-M |
| Maximum Pressure | 175 psi |
| Maximum Air Flow | 29 cfm |
| Tank capacity | 30 gal |
| OTHER OPTIONS | |
| Screens | Yes |
| Special Tools Group | Yes |
| Extended Warranty | Yes |
| Preventative Maintenance | Optional |
| Special Paint | Yes |
Copyright © 2026 - All Rights Reserved - EquipmentLocator.com