Features
FIRESTICK DRILL ROD
Experience the difference that has made one-piece, forged Firestick® drill rod the industry benchmark.
STACKABLE ROD BOX
With consideration to ease of use and safety, the D100x140 S3 stackable rod box design allows additional rod to be loaded via the upper rod box. When matched with the optional onboard crane, no additional support equipment is required to load additional rod.
WIRELESS REMOTE-CONTROLLED KNUCKLE BOOM CRANE
The D100x140 S3 is available with a wireless remote-controlled knuckle boom crane. At maximum reach of 19.5’ (6 m), the crane has a rated capacity of 3970 lb (1800.8 kg).
DUAL DISPLAYS
State-of-the-art dual displays offer easy visibility to a wide range of machine performance, diagnostic and drilling information.
ANGLED, TRUE OPEN-TOP VISES
Equipped with angled, true open-top vises with an 8” (20.3 cm) opening, the D100x140 S3 offers good operator visibility during rod makeup/breakout. The true open-top design accommodates mud motors and other large tooling. Responsive and powerful clamping and breakout actions can boost cycle time efficiency.
INCREASE YOUR RANGE
Unique four-bar linkage and additional pads allow operators to set up entry angles of 11 to 24 degrees – increasing range attainable with tracks fully on ground.
Specs
| GENERAL DIMENSIONS AND WEIGHTS | |
| Length (Minimum Transport) - 15 ft (4.6 m) | 376.8 in |
| Length (Minimum Transport) - 20 ft (6.1 m) | 436.8 in |
| Width (Minimum Transport) | 102 in |
| Width (With Cab, Minimum Transport) | 102 in |
| Height (Minimum Transport) | 138 in |
| Height (With Cab) | 138 in |
| Weight - 15 ft (6.1 m) | 50300 lbs |
| Weight - 20 ft (6.1 m) | 52500 lbs |
| Weight (Cab Option) - 15 ft (4.6 m) | 49800 lbs |
| Weight (Cab Option) - 20 ft (6.1 m) | 57220 lbs |
| Angle of Approach | 18 deg |
| ENGINE | |
| Make and Model | CAT |
| Fuel Type | Ultra low sulfur diesel |
| Maximum Engine RPM | 2200 rpm |
| Gross Horsepower | 275 hp |
| Aspiration | Twin turbocharged |
| Max Fuel Consumption | 15 gph |
| Maximum Operating Angle (Fore/Aft)* | 25 |
| Maximum Operating Angle (Left/Right)* | 25 |
| OPERATIONAL | |
| Thrust | 100000 lbs |
| Pullback | 100000 lbs |
| Maximum Carriage Speed at Maximum Engine RPM | 175 ft/min |
| Maximum Spindle Torque (Low at Maximum Engine RPM) | 14000 ft-lb |
| Maximum Spindle Torque (Medium at Maximum Engine RPM) | 10500 ft-lb |
| Maximum Spindle Torque (High at Maximum Engine RPM) | 7000 ft-lb |
| Maximum Spindle Speed at Max Engine RPM | 215 rpm |
| Minimum Bore Diameter | 6 in |
| Maximum Ground Drive Speed at Maximum Engine RPM | 2.8 mph |
| Automated Rod Loader | Semi-automated |
| Noise Level at Operator's Ear - 15 ft (4.6 m) | 82 dB(a) |
| Noise Level at Operator's Ear - 20 ft (6.1 m) | 84 dB(a) |
| Drill Rack Angle | 24 deg |
| FLUID CAPACITIES | |
| Fuel Tank | 120 gal |
| Hydraulic Tank | 90 gal |
| Hydraulic System | 120 gal |
| DRILLING FLUID SYSTEM OPTION ONE | |
| Maximum Flow | 230 gpm |
| Maximum Pressure | 1100 psi |
| Brand | Aplex |
| DRILLING FLUID SYSTEM OPTION TWO - 15 FT (4.6 M) | |
| Maximum Flow | 150 gpm |
| Maximum Pressure | 1100 psi |
| Brand | Aplex |
| DRILLING FLUID SYSTEM OPTION TWO - 20 FT (6.1 M) | |
| Maximum Flow | 230 gpm |
| Maximum Pressure | 1000 psi |
| Brand | Aplex |
| DRILLING FLUID SYSTEM OPTION THREE - 20 FT (6.1 M) | |
| Maximum Flow | 200 gpm |
| Maximum Pressure | 1000 psi |
| Brand | Kerr |
| CRANE | |
| Maximum Lifting Capacity | 5700 lbs |
| Maximum Lifting Capacity - Boom Extended/Max Reach | 4200 lbs |
| Rotation | 400 deg |
| Maximum Reach | 19.5 in |
| Optional Crane | Yes |
| Wireless Remote | Yes |
| FEATURES | |
| Breakout System | Open top vise |
| Drilling Lights | Standard |
| Flow Indicator | Standard |
| Stakedown System | Optional |
| Cab | Standard |
| Strike Alert | Standard |
| Remote Lockout | Standard |
| Operator Presence | Standard |
Copyright © 2024 - All Rights Reserved - EquipmentLocator.com