Features
SELF-ADJUSTING HYDRAULIC DRY CLUTCH
Self-adjusting, push-button, hydraulic dry clutch provides consistent engagement — helping to prolong clutch life, lower maintenance costs and reduce operator error.
EASY KNIFE CHANGE-OUT
Knife setup is fast and easy. Knife position is set with two small bolts — no babbiting needed. Bite size is adjustable in 1/8 in (.3 cm) increments from 1/8 in (3 mm) up to 5/8 in (16 mm) via shims. Makes knife change-out on the jobsite easy and helps reduce cost of operation.
VARIABLE CHIP SIZES
Microchip drum produces a variety of sizes between 1/8 in (3 mm) to 5/8 in (16 mm) chips.
REPLACEABLE WEAR PARTS
High-wear material flow areas of the machine — such as the drum, discharge chute, cutter housing and infeed conveyor floor — are designed with replaceable bolt-in wear parts to extend machine life.
SMARTCRUSH AND VARIABLE-SPEED, DUAL-INFEED CONVEYOR CHAINS
With SmartCrush technology that automatically increases down pressure when difficult material enters the cutting drum, and variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine — not pushing the material through.
COMPACT DESIGN
The WC2500XL has a compact design to aid in maneuvering in the woods, on tight jobsites and down narrow roads, but packs 600 hp (448 kW) of power to meet your production demands.
Specs
| GENERAL DIMENSIONS AND WEIGHTS | |
| Maximum Length (Operation) | 29.8 ft |
| Maximum Length - Transport | 29.8 ft |
| Maximum Width (Transport) | 108 in |
| Maximum Height (Transport) | 10.9 ft |
| Weight | 38000 lbs |
| Tongue Weight | 7500 lbs |
| Sound Power | 121 |
| ENGINE - OPTION ONE | |
| Make and Model | Cummins QSX15 Tier 4 Final |
| Number of Cylinders | 6 |
| Gross Horsepower (Maximum) | 600 hp |
| Torque (Max) | 2050 ft-lb |
| Fuel Tank Capacity | 200 gal |
| Max Fuel Consumption | 31 gph |
| Fuel Type | Ultra-low sulfur diesel |
| Air Cleaner | Two-stage direct flow |
| Oil Filter | Spin-on |
| Recommended Oil | CES 20078 or 20081 |
| Oil Volume with Filter | 52 qt |
| Maximum Angle of Continuous Operation | 31 deg |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 23 gal |
| Alternator | 105 |
| Fan | Reversible |
| Clutch Type | PT Tech electronically controlled dry |
| Clutch Drive Engagement | Hydraulic |
| DRUM/DISC CUTTING SYSTEM | |
| Material Capacity | 25 in |
| Thickness | .5 in |
| Width | 34 in |
| Diameter | 36 in |
| Speed | 1169 rpm |
| Weight With Shaft | 3163 lbs |
| Safety Lock - Number of Positions | 4 |
| Type | Adjustable |
| Knife Thickness | .6 in |
| Material | A8 chipper steel |
| Useable Edges | 1 |
| Knife Size | 17 |
| Number of Bolts/Knife | 5 |
| Replaceable Threaded Knife Block | Hex nut |
| Fixture Method | Bolt |
| Bedknife Size | 34" wide |
| Bedknife Thickness | 1.5 in |
| Bedknife Material | Cold-formed low-carbon bar |
| Bedknife - Number of Useable Edges | 2 |
| Number of Pockets | 4 |
| Replaceable Wear Plates | Yes |
| Number of Replaceable Wear Plates | 8 |
| CUTTER DRIVE COMPONENTS - ENGINE OPTION ONE | |
| Number of Bearings | 2 |
| Bore | 5.4 in |
| Type | Pillow block |
| Manufacturer | Dodge |
| Dynamic Capacity | 166000 lbs |
| Static Capacity | 236000 lbs |
| Belt Idler/Tensioner | Slide engine |
| Belt Type | 12 rib 5 V |
| INFEED ROLLER | |
| Infeed Roller Width | 34 in |
| Maximum Feed Height | 27 in |
| Infeed Roller Weight | 575 lbs |
| Infeed Roller Diameter | 28 in |
| Tooth Design | Straight knives |
| Drive Motor | WS-series |
| Drive Planetary | Auburn Model 9 |
| Drive Displacement | 6.9 cu-in |
| Drive Manufacturer | White |
| Feed Roller Down Pressure | 1530 |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | One upper, one conveyor |
| Number of Knives | 12 |
| Feed Roller Distance to Drum | 1 in |
| Feed Roller Speed | 98 ft/min |
| DISCHARGE SYSTEM | |
| Chute Height | 132 in |
| Bottom Thickness | .1 in |
| Bottom Replaceable Wear Plate | AR 400 |
| Wear Plate Thickness | .2 in |
| Top Thickness | .2 in |
| Side Wall Thickness | .2 in |
| Deflector Thickness | .2 in |
| Rotation Type | Hydraulic |
| Rotational Lock | Hydraulic |
| Side Deflector Angle | 14 deg |
| Up Deflector Angle | 22 deg |
| Down Deflector Angle | 14 deg |
| HYDRAULIC SYSTEM | |
| Tank capacity | 33 gal |
| Recommended Oil Type | Hy-Power 68, 46, or 32 |
| System Type | Open-center |
| Filtration Method | Intake suction screens and return filter |
| Pump Flow at Maximum RPM | 16 gpm |
| System relief pressure | 4000 psi |
| Auto Reverse PSI | 3750 psi |
| Flow Control | Two - feed roller and infeed conveyor |
| Oil Cooler | 1 |
| ELECTRICAL SYSTEM | |
| System Voltage | 24V |
| Battery | Group 8D 1400 CCA (dual) |
| Standard Gauges | Yes |
| Deluxe Gauges | No |
| Switches | Push button |
| Controller | Danfoss MC-050 |
| Display | DP10 |
| Shutdown System | Yes |
| Radio Remote Control | Yes |
| CHASSIS | |
| Frame Description | 10" x 4" x .375" wall rectangular tubing |
| Toolbox Description | Lockable |
| Tongue Description | Fixed with skidder grab |
| Tongue Extension | None |
| Hitch Type | Pintle |
| Grapple Handle | 30" wide |
| Fender Description | Jeep style (steel) |
| Axle/Suspension | Tandem axles |
| Type | Leaf spring |
| Manufacturer | Dexter |
| Capacity | 18740 |
| Tires | 385/65R22.5 Super Single |
| Wheels | 22.5 x 14 aluminum |
| Brake Type | Air |
| Trailer Light Type | LED |
| OTHER OPTIONS | |
| Special Paint | Yes |
| Extended Warranty | Yes |
| Preventative Maintenance | Yes |
| Adjustable Height Discharge Chute | No |
| INFEED CONVEYOR | |
| Feed Table Width | 98 in |
| Feed Table Length - Option One | 10 ft |
| Feed Conveyor Type | Dual independent chain |
| Material Construction | .50" thick |
| Infeed Slope | 6 deg |
| Number of Infeed Chains | 2 |
Copyright © 2026 - All Rights Reserved - EquipmentLocator.com