Vermeer WC2500TX

COMPACT DESIGN

The WC2500TX has a compact design to aid in maneuvering in the woods and land-clearing sites, but packs 600 hp (448 kW) of power to meet your production demands.

SMARTCRUSH AND VARIABLE-SPEED, DUAL-INFEED CONVEYOR CHAINS

With SmartCrush technology that automatically increases down pressure when difficult material enters the cutting drum, and variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine — not pushing the material through.

REPLACEABLE WEAR PARTS

High-wear material flow areas of the machine — such as the drum, discharge chute, cutter housing and infeed conveyor floor — are designed with replaceable bolt-in wear parts to extend machine life.

VARIABLE CHIP SIZES

The microchip drum produces a variety of sizes between 1/8 in (3 mm) to 5/8 in (16 mm) chips, while the macrochip drum produces chip sizes between 5/8 in (16 mm) and 1.25 in (32 mm).

EASY KNIFE CHANGE-OUT

Knife setup is fast and easy. Knife position is set with two small bolts — no babbiting needed. Bite size is adjustable in 1/8 in (3 mm) increments from 1/8 in (3 mm) up to 1.25 in (32 mm) via shims. Makes knife change-out on the jobsite easy to help reduce cost of operation.

SELF-ADJUSTING HYDRAULIC DRY CLUTCH

Self-adjusting, push-button, hydraulic dry clutch provides consistent engagement — helping to prolong clutch life, lower maintenance costs and reduce risk of damage by operator.