Features
MULTIPLE ENGINE OPTIONS
A CAT C13 Tier 4 Final engine provides 440 hp (328 kW) of power to meet your jobsite demands. A Tier 3 engine option is available for less-regulated countries.
SMARTCRUSH AND VARIABLE-SPEED, DUAL-INFEED CONVEYOR CHAINS
With technology such as SmartCrush to automatically increase down pressure when difficult material enters the cutting drum, and the variable-speed dual-infeed conveyor chains, operators can concentrate on loading the machine, not pushing the material through.
REMOTE CONTROLS
A remote control allows operators to view engine parameters and change a variety of settings.
TWO KNIFE OPTIONS
Two knife options, with depths of cut of 3/8 in (.9 cm) or 5/8 in (1.6 cm), allow the operator to select the knife that meets their end product sizing needs.
BUILT-IN SKIDDER GRAB
The WC2300XL has a compact design and built-in skidder grab on the tongue, allowing it to be moved around on-site by a skidder or excavator.
Specs
| GENERAL DIMENSIONS AND WEIGHTS | |
| Maximum Length (Operation) | 29.8 ft |
| Maximum Length - Transport | 29.8 ft |
| Maximum Width (Transport) | 98 in |
| Maximum Height (Transport) | 10.9 ft |
| Weight | 32700 lbs |
| Weight - Engine Option Two | 35000 lbs |
| Tongue Weight | 6750 lbs |
| Tongue Weight - Engine Option Two | 7300 lbs |
| Sound Power | 119 db(A) |
| Sound Power - Engine Option Two | 118.1 db(A) |
| ENGINE - OPTION ONE | |
| Make and Model | CAT C-13 Tier 3 (Stage IIIA) |
| Number of Cylinders | 6 |
| Gross Horsepower (Maximum) | 440 hp |
| Torque (Max) | 1483 ft-lb |
| Fuel Tank Capacity | 150 gal |
| Max Fuel Consumption | 22.6 gph |
| Fuel Type | Low sulfur diesel |
| Air Cleaner | Two-stage |
| Oil Filter | Spin-on remote |
| Recommended Oil | API CJ-4 or ECF-3 |
| Oil Volume with Filter | 36 qt |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 18.5 gal |
| Alternator | 75 amps |
| Fan | Reversible |
| Clutch Type | PT Tech electronically controlled dry |
| Clutch Drive Engagement | Engaged dry clutch |
| ENGINE - OPTION TWO | |
| Make and Model | CAT C-13 Tier 4 Final (Stage IV) |
| Number of Cylinders | 6 |
| Gross Horsepower (Maximum) | 440 hp |
| Torque (Maximum) | 1485 ft-lb |
| Fuel Tank Capacity | 150 gal |
| Max Fuel Consumption | 22.6 gph |
| Fuel Type | Ultra-low sulfur diesel |
| Air Cleaner | Two-stage |
| Oil Filter | Spin-on remote |
| Recommended Oil | API CJ-4 or ECF-3 |
| Oil Volume with Filter | 36 qt |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 18.5 gal |
| Alternator | 105 amps |
| Fan | Variable and reversible |
| Clutch Type | PT Tech electronically controlled dry |
| Clutch Drive Engagement | Engaged dry clutch |
| DRUM/DISC CUTTING SYSTEM | |
| Material Capacity | 23 in |
| Thickness | .4 in |
| Width | 34 in |
| Diameter | 36 in |
| Speed | 1169 |
| Weight With Shaft | 2200 lbs |
| Safety Lock - Number of Positions | 8 |
| Number of Knives | 8 |
| Type | Babbitted |
| Knife Thickness | .6 in |
| MaterialA | 8 chipper steel |
| Useable Edges | One |
| Knife Size | 8.5 |
| Number of Bolts/Knife | 4 |
| Replaceable Threaded Knife Block | Hex nut (4) per knife |
| Fixture Method | Bolt |
| Bedknife Size | 34" wide |
| Bedknife Thickness | 1.5 in |
| Bedknife Material | Cold-formed low-carbon bar |
| Bedknife - Number of Useable Edges | 2 |
| Number of Pockets | 8 |
| Dimension of Pockets | 8.5 in |
| Replaceable Wear Plates | Yes |
| Number of Replaceable Wear Plates | 8 counter knives |
| CUTTER DRIVE COMPONENTS - ENGINE OPTION ONE | |
| Number of Bearings | 2 |
| Bore | 4.4 in |
| Type | Pillow block |
| Manufacturer | Dodge |
| Dynamic Capacity | 170000 lbs |
| Static Capacity | 200000 lbs |
| Belt Idler/Tensioner | None |
| Belt Type | 9 rib 5 V |
| INFEED ROLLER | |
| Infeed Roller Width | 34 in |
| Maximum Feed Height | 27 in |
| Infeed Roller Weight | 575 lbs |
| Infeed Roller Diameter | 28 in |
| Tooth Design | Straight knives |
| Drive Motor | WS-Series |
| Drive Planetary | Auburn Model 9 |
| Drive Displacement | 6.9 cu-in |
| Drive Manufacturer | White |
| Feed Roller Down Pressure | 1530 |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | One upper, one conveyor |
| Number of Knives | 12 |
| Feed Roller Distance to Drum | 1 in |
| Feed Roller Speed | 98 ft/min |
| DISCHARGE SYSTEM | |
| Chute Height | 132 in |
| Bottom Thickness | .1 in |
| Bottom Replaceable Wear Plate | AR 400 |
| Wear Plate Thickness | .2 in |
| Top Thickness | .2 in |
| Side Wall Thickness | .2 in |
| Deflector Thickness | .2 in |
| Rotation Type | 14 |
| Rotational Lock | 22 |
| Side Deflector Angle | 14 deg |
| HYDRAULIC SYSTEM | |
| Tank capacity | 42 gal |
| Recommended Oil Type | Hy-Power 68 |
| System Type | Open-center |
| Filtration Method | Intake suction screens and return filter |
| Pump Flow at Maximum RPM | 16 gpm |
| System relief pressure | 4000 psi |
| Auto Reverse PSI | 3800 psi |
| Flow Control | Two-feed roller and infeed conveyor |
| Oil Cooler | 1 |
| ELECTRICAL SYSTEM | |
| System Voltage | 24V |
| Battery | Group 8D 1155 CCA (Dual) |
| Standard Gauges | Yes |
| Deluxe Gauges | No |
| Switches | Toggle On/Off |
| Controller | ASM - C248 WC2300 |
| Display | DP04 |
| Shutdown System | Yes |
| Radio Remote Control | Yes |
| CHASSIS | |
| Frame Description | 10" x 4" x .375" wall rectangular tubing |
| Toolbox Description | Lockable |
| Tongue Description | Fixed with skidder grab |
| Tongue Extension | None |
| Hitch Type | Pintle |
| Grapple Handle | 30" wide |
| Fender Description | Jeep style (steel) |
| Axle/Suspension | Dual axle |
| Type | Leaf spring |
| Manufacturer | Dexter |
| Capacity | 18740 |
| Tires | 385/65R22.5 Super Single |
| Wheels | 22.5 x 14 aluminum |
| Brake Type | Air |
| Trailer Light Type | Standard |
| OTHER OPTIONS | |
| Special Paint | Yes |
| Extended Warranty | Yes |
| Preventative Maintenance | Yes |
| Adjustable Height Discharge Chute | No |
| INFEED CONVEYOR | |
| Feed Table Width | 98 in |
| Feed Table Length - Option One | 10 ft |
| Feed Conveyor Type | Dual independent chain |
| Material Construction | .38" thick |
| Infeed Slope | 6 deg |
| Number of Infeed Chains | 1 |
Copyright © 2026 - All Rights Reserved - EquipmentLocator.com