Features
TALL, WIDE THROAT OPENING
Move material smoothly without bridging, thanks to a tall, wide throat opening.
HEAVY-DUTY ROLLERS
Extend belt life even under tough loading conditions with closely set, heavy-duty rollers supporting the apron conveyor.
INCREASING SCREENING AREA
Keep screen weights low when processing wet materials by clamping on a smaller diameter tension screen wire and increasing screening area.
REDUCED SPILLAGE
Speed up your clean up because the flashing and sheeting fit tightly against the drum and conveyors to reduce spillage.
ADVANCED CONTROLS
Operators can control the machine through either the Vermeer DP10 display mounted on the control panel, or through a handheld transceiver remote.
STAINLESS STEEL SCREEN OPTIONS
Stainless steel screens offer increased durability and reduce the amount of screen binding when working with wet or corrosive materials.
Specs
| GENERAL DIMENSIONS AND WEIGHTS | |
| Weight | 39700 lbs |
| Hitch Weight | 13400 lbs |
| Transport Length | 46.5 ft |
| Transport Width | 102 in |
| Transport Height | 13.1 ft |
| Operation Length | 86 ft |
| Operation Width | 102 in |
| Operation Height | 15.9 ft |
| Capacity | Approximately 150 cu yd (114.7 m³) per hr with .5" (1.3 cm) screens installed and material with moisture less than 40% |
| ENGINE - OPTION ONE | |
| Make and Model | Cummins QSB 3.8l Tier 4 Final |
| Number of Cylinders | 4 |
| Engine Rating | 120 hp |
| Fuel Tank Capacity | 73 gal |
| Fuel Consumption | 3.1 gph (11.7 L/hr) |
| Maximum Engine Operating Angle (Operating angles do not indicate safe machine operating angles) | 30 deg |
| Battery | 950 CCA |
| Oil Filter | Spin-on |
| Recommended Oil | Mobil 15W40 |
| System Voltage | 12 V, 134 amp alternator |
| Air Cleaner | Dual element |
| Radiator Fan | Suction |
| HYDRAULIC SYSTEM | |
| Operation | 62.9 gpm @2500 psi (238.1 L/min @ 172.4 bar) |
| Tank capacity | 157 gal |
| CHASSIS | |
| Frame Description | Four independent hydraulic jacklegs |
| Axle/Suspension | Leaf spring |
| Capacity | 22500 lbs |
| Tires - Option One | 235-75R 17.5 H qty 8 |
| HOPPER AND APRON CONVEYOR | |
| Hopper Capacity | 5 cu yd |
| Hopper Bottom Width | 34 in |
| Apron Conveyor Speed | 0-35 fpm (0-10.7 m/min) |
| Apron Opening Height | 34 in |
| Apron Opening Width | 37 in |
| Hopper Height | 9.5' (2.9 m) from ground level at operating incline |
| Hopper Opening | 13.2' x 5' (4 m x 1.5 m) |
| Apron Conveyor Length | 15 ft |
| Apron Conveyor Belt Width | 42 in |
| Apron Conveyor Rollers | 6" (10.2 cm) diameter qty. 13 |
| SCREEN DRUM | |
| Drum Operation | 0-33.1 gpm (0-125.3 L/min) |
| Drum Motor | 48.8 cu in (800 cu cm) displacement |
| Drum Diameter | 5 ft |
| Drum Support Description | Four steel trunnion rollers 8 in (20.3 cm) diameter 4 in (10.2 cm) width |
| Drum Length | 21 ft |
| Thrust Bearing Diameter | 5 in |
| Thrust Bearing Face | 2.9 in |
| Drum Speed | 0-24 rpm |
| Drum Drive Chain | 120 WT |
| Drum Angle Adjustability | 3-5 degrees |
| Maximum Screen Panels | 6 |
| SCREEN BRUSHES | |
| Brush Diameter | 14 in |
| Bristle Material | Polyethylene |
| Brush Assembly Support | Two 1.25" (3.2 cm) sealed ball bearings |
| COLLECTING CONVEYOR | |
| Conveyor Belt Width | 36 in |
| Conveyor Belt Type | 220 lb (99.8 kg), 2-ply, 3/16" x 1/16" (4.8 mm x 1.6 mm) |
| Head/Tail Pulley Type | Rubber-lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Rubber Flashing | Adjustable, .25" (6.4 mm) thick, 4" (10.2 cm) |
| Idler Type | 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (61 cm) centers |
| Tail Pulley Takeup | 12 in |
| Self-Cleaning Return Idlers | 7, each 4" (10.2 cm) diameter |
| Fines Conveyor Frame | Part of trailer frame |
| FINES CONVEYOR | |
| Conveyor Motor Displacement | 28.3 cu-in |
| Fines Conveyor Length | 65 ft |
| Fines Belt Speed | 515 ft/min |
| Conveyor Belt Width | 36 in |
| Conveyor Belt Type | 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) |
| Conveyor Belt Stacking Height | 14.5' with drum at 4 degree |
| Head Pulley Type | Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Rubber Flashing | Adjustable, .25" (.64 cm) thick, 4" (10.16 cm) |
| Troughing Idler Type | 20 degrees CEMA "B" with permanently sealed bearings spaced at 24" (60.96 cm) centers |
| Self-Cleaning Tail Pulley Dimensions | 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft |
| Tail Pulley Takeup | 12 in |
| Self-Cleaning Return Idlers | 7, each 4" (10.2 cm) diameter |
| Fines Conveyor Frame | 4" x 8" (10.2 cm x 20.3 cm) structural steel tubing |
| FINES CONVEYOR OPTION-RADIAL | |
| Conveyor Motor Displacement | 15.9 cu-in |
| Fines Conveyor Length | 30.5 ft |
| Fines Belt Speed | 705 ft/min |
| Conveyor Belt Type | 150 lb (99.8 kg), 2-ply, 1/32" x 1/32" (.8 mm x .8 mm), vulcanized |
| Head/Tail Pulley Type | Rubber-lagged, crowned, 9.75" (24.8 cm) diameter, 32" (81.3 cm) wide |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Rubber Flashing | Adjustable, .25" (6.4 mm) thick, 4" (10.2 cm) |
| Idler Type | 30 degrees CEMA "B" with permanently sealed bearings spaced at 41" (104.1 cm) centers |
| Self-Cleaning Return Idlers | 4, each 4" (10.2 cm) diameter |
| Fines Conveyor Frame | 2" x 8" (5.1 cm x 20.3 cm) structural steel building |
| OVERS CONVEYOR - OPTION 1 | |
| Overs Conveyor Length | 20 ft |
| Maximum Variable Overs Belt Speed | 290 ft/min |
| Conveyor Belt Size | 36" (91.4 cm) wide with raised crescent |
| Conveyor Belt Type | 220 lb (99.8 kg), 2 ply, 2/16" x 1/16" (4.8 mm x 1.6 mm) |
| Conveyor Belt Stacking Height | 3' (.9 m) x 10' (3.1 m) |
| Head Pulley Type | Rubber lagged, 12" (30.5 cm) diameter, 38" (996.5 cm) wide |
| Head Pulley Bearing | 2.5" (6.4 cm) pillow block |
| Self-Cleaning Tail Pulley Dimensions | 10" (25.4 cm) diameter, 38" (96.5 cm) wide with 2.4" (6.1 cm) shaft |
| Tail Pulley Takeup | 12 in |
| Solid Return Idler Size | 4" (10.2 cm) diameter |
| Overs Conveyor Frame | 2.3" x 8" (5.7 cm x 20.3 cm) structural steel channel tubing |
Copyright © 2026 - All Rights Reserved - EquipmentLocator.com