Features
VERMEER AUTOSWEEP® SYSTEM
AutoSweep monitors engine speed and automatically adjusts cutter wheel sweep rate.
LONG TRACKS
Ground disturbance is minimized due to long tracks which provide lower ground pressure and improved stability.
OPERATOR PRESENCE SYSTEM
Control handle for the boom swing and boom raise/lower is equipped with operator presence capacitance-sensing handle. This system is intended to help protect the operator.
SMOOTH OPERATION
The exclusive SmartSweep™ control system monitors engine load and provides continuous feedback, resulting in a smooth and consistent cutter wheel sweep rate.
HYDRAULICALLY-DRIVEN CUTTER WHEEL AND GROUND DRIVE
The elimination of belts or chain drives reduces service and maintenance.
Specs
| GENERAL DIMENSIONS AND WEIGHTS | |
| Length | 94 in |
| Width | 35 in |
| Height | 49 in |
| Weight - Engine Option One | 1550 lbs |
| ENGINE - OPTION ONE | |
| Make and Model | Kohler ECH740 |
| Number of Cylinders | 2 |
| Gross Horsepower (Maximum) | 25 hp |
| Torque (Max) | 42 ft-lb |
| Fuel Tank Capacity | 6.8 gal |
| Max Fuel Consumption | 2.4 gph |
| Fuel Type | Gas |
| Air Cleaner | 6 " (15.2 cm) 2-Stage dry |
| Oil Filter | Spin-on |
| Recommended Oil | Kohler oil or API CH4/SJ |
| Oil Volume with Filter | 2 qt |
| Maximum Angle of Continuous Operation | 25 deg |
| Cooling Medium | Air/oil |
| CUTTERWHEEL SYSTEM | |
| Cutterwheel Diameter without Teeth | 16 in |
| Cutterwheel Thickness | .5 in |
| Cutterwheel Speed | 1110 rpm |
| Cutterwheel Straight Line Dimension | 35.5 in |
| Cutterwheel Cut Above Ground | 25 in |
| Cutterwheel Cut Below Ground | 12 in |
| Tooth Description | Yellow Jacket Cutter System |
| Number of Teeth | 16 |
| Number of Indexes | 2 |
| Number of Pockets | 16 |
| Reversible Pockets | Yes |
| Cutterwheel Guard | Yes |
| Chip Containment | 2.2 cu ft |
| CUTTERWHEEL DRIVE COMPONENTS | |
| Lower Gearbox | Hydraulic motor |
| HYDRAULIC SYSTEM | |
| Tank capacity | 9 gal |
| Recommended Oil Type | ISO 68 |
| System Type | Open loop |
| Filtration Method | Inline return filter |
| Pump Flow at Maximum RPM | 16 gpm |
| System relief pressure | 2750 psi |
| Flow Control | Autosweep (option) |
| Directional Control | Standard |
| Oil Cooler | Yes. Fan-cooled |
| ELECTRICAL SYSTEM | |
| System Voltage | 12 |
| Battery405 | |
| Standard GaugesHour meter/tach | |
| SwitchesCutter wheel drive | |
| ControllerYes | |
| CHASSIS | |
| Control Station Description | Fixed-rear |
| TRACK DRIVE SYSTEM | |
| Track Type | Rubber 7 " (17.8 cm) width |
| Track Width - Retracted | 35 " (88.9 cm) |
| Track Width - Extended | 35 " (88.9 cm) |
| Track Length on Ground | 31.4 " (79.7 cm) |
| Type of Idler | Cast |
| Number of Idlers | 5 |
| Track Drive Pump Type | Hydrostatic |
| System Relief Pressure | 2900 psi (200 bar) |
| Pump Flow at Maximum RPM | 11.4 gpm (43.1 L/min) |
| Track Drive Motor Type | Geroter |
| Track Brake Type | Hydrostatic |
| High Speed Travel | 3.2 mph |
| Ground Bearing Pressure - Soft Ground | 3.4 psi |
| OTHER OPTIONS | |
| Special Paint | Per request |
| Extended Warranty | Per request |
| Preventive Maintenance | Per request |
Copyright © 2026 - All Rights Reserved - EquipmentLocator.com