Features
ELECTRONIC FUEL INJECTION (EFI) ENGINE
An electronic fuel injection (EFI) engine performs well during cold-weather starts and provides improved fuel economy over comparable carbureted gas engines.
SMARTFEED SYSTEM
Increase operator productivity while reducing strain on vital engine parts with the help of the patented SmartFeed system. This feed-sensing control system monitors engine rpm and automatically stops and reverses the feed roller when feeding larger, hardwood material.
3-YEAR/3000-HOUR EXTENDED LIMITED WARRANTY
Protect your investment with a 3-year/3000-hour extended limited warranty on drum housings, cutter drum, shaft and ring-fetter hubs in addition to the 1-year/1000-hour Vermeer equipment limited warranty.
Specs
| GENERAL DIMENSIONS AND WEIGHTS | |
| Length - Feed Table Up, Tongue In | 150 in |
| Length - Table Down, Tongue Extended | 198 in |
| Width | 66.5 in |
| Height | 101 in |
| Weight - Engine Option One | 4680 lbs |
| Tongue Weight - Engine Option One | 520 lbs |
| Sound Power | 119 dB |
| ENGINE - OPTION ONE | |
| Make and Model | PSI 3.0L EFI |
| Number of Cylinders | 4 |
| Gross Horsepower (Maximum) | 89 hp |
| Torque (Max) | 142 ft-lb |
| Fuel Tank Capacity | 20 gal |
| Max Fuel Consumption | 7.8 gph |
| Fuel TypeUnleaded and E | 10 gasoline |
| Air Cleaner | 2-stage dry with safety element |
| Oil Filter | Spin-on |
| Recommended Oil | SAE 10W30 |
| Oil Volume with Filter | 4.5 qt |
| Maximum Angle of Continuous Operation | 20 deg |
| Cooling Medium | Liquid |
| Coolant Capacity (Engine and Radiator) | 3.6 gal |
| Alternator | 70 |
| Fan | 16.5" (41.9 cm) pusher |
| Clutch Type | Clutchless PTO |
| Clutch Drive Engagement | Belt tensioner |
| FEED SYSTEM | |
| Feed Roller Orientation | Horizontal |
| Number of Feed Rollers | 1 |
| Feed Roller Clamp Load | 350 lbs |
| Feed Roller Minimum Distance to Drum | 1 in |
| Feed Roller Dimension | 20 " x 17 " (50.8 cm x 43.2 cm) |
| Number of Knives | 2 |
| Weight of Feed Roller | 400 lbs |
| Number of Feed Roller Motors | 1 |
| Motor Displacement | 28.3 |
| Motor Manufacturer | White |
| Feed Speed | 118 ft/min |
| Infeed Table Width | 52 in |
| Infeed Table Length | 32 in |
| Infeed Hopper Height | 12 in |
| Infeed Throat Capacity | 12 " x 17.5 " (30.5 cm x 43.2 cm) |
| Pinch Point - Distance to End of Feed Table | 66.5 in |
| Distance from Feed Table to Ground | 26 in |
| Infeed Table Material Thickness | .2 in |
| SAFETY SYSTEM | |
| Bottom Feed Stop Bar | Standard |
| Bottom Feed Stop Bar Diameter | 2 in |
| Bottom Feed Stop Bar Material Thickness | 11 GA |
| Actuation Force (BFSB) | 34 lbs |
| Normal Sensitivity | 22 deg |
| Reduced Sensitivity | 12 deg |
| Reset Method | Green hold-to-run button |
| Four Position Feed Control Bar | Standard |
| Positions | 4: E-stop, forward, neutral, and reverse |
| Actuation Force | 34 lbs |
| Green Hold to Run Button | Standard |
| DRUM/DISC CUTTING SYSTEM | |
| Material Capacity | 12 in |
| Thickness | 20 in |
| Diameter | 20 in |
| Speed | 2220 rpm |
| Weight With Shaft | 460 lbs |
| Safety Lock - Number of Positions | 2 |
| Number of Knives | 2 |
| Knife Thickness | .6 in |
| Material | A8 chipper steel |
| Useable Edges | 2 |
| Knife Size | 0.63 " x 4.5 " x 9 " (1.6 cm x 11.4 cm x 22.9 cm) |
| Number of Bolts/Knife | 4 |
| Replaceable Threaded Knife Block | Yes |
| Number of Paddles | 5 |
| Fixture Method | Weld-on |
| Air Flow | 580 cfm |
| Bedknife Size | 3.5 " x 17.3 " (8.9 cm x 43.8 cm) |
| Bedknife Thickness | 1 in |
| Bedknife Material | 1018 |
| Bedknife - Number of Useable Edges | 4 |
| CUTTER DRIVE COMPONENTS - ENGINE OPTION ONE | |
| Number of Bearings | 2 |
| Bore | 2.4 in |
| Type | Spherical rollers |
| Manufacturer | Linkbelt |
| Dynamic Capacity | 31400 lbs |
| Static Capacity | 53500 lbs |
| Belt Idler/Tensioner | Yes |
| Belt Type | 5V |
| DISCHARGE SYSTEM | |
| Chute Height | 101 in |
| Chute Rotation Angle | 270 deg |
| Rotation Type | Manual rotate with pin lock |
| Rotational Lock | Yes |
| HYDRAULIC SYSTEM | |
| Tank capacity | 7 gal |
| Recommended Oil Type | Vermeer VMF |
| System Type | Open center |
| Filtration Method | 10 micron return; 100 micron suction |
| Pump Flow at Maximum RPM | 3 gpm |
| System relief pressure | 2500 psi |
| Flow Control | No |
| Directional Control | Yes |
| Oil Cooler | No |
| ELECTRICAL SYSTEM | |
| System Voltage | 12 volt |
| Battery | Group 24; 580 CCA |
| Standard Gauges | Fuel and MFD |
| Deluxe Gauges | Standard |
| Switches | Droop, EcoIdle, and Sensitivity |
| Controller | Vermeer ACS |
| Display | In countries that drive on the left side of the road versus the right side of the road, moving these controls over to the left side moves the operator off of the traffic side of the road. |
| Shutdown System | High temp, low pressure |
| Radio Remote Control | No |
| CHASSIS | |
| Frame Description | 7" (17.8 cm) Z channel; .25" (0.6 cm) thickness |
| Tongue Description | 2.5" x 4.5" x .25" (6.4 cm x 11.4 cm x .6 cm) |
| Tongue Extension | Extendable 24" (61 cm) at 12" (30.5 cm) increments |
| Hitch Type | Pintle |
| Fender Description | Bolt-on steel |
| Axle/Suspension | Torsion |
| Type - Option One | Rubber torsional |
| Manufacturer - Option One | Dexter |
| Capacity - Option One | 5200 lb (2358.7 kg) |
| Tires - Option One | ST235/80/R16 Load Range E |
| Wheels - Option One | 16 " x 6 " (40.6 cm x 15.2 cm) |
| Axle/Suspension - Option Two | Torsion |
| Type - Option Two | Rubber torsional |
| Manufacturer - Option Two | Dexter |
| Capacity - Option Two | 7000 lb (3175.2 kg) |
| Tires - Option Two | ST235/80R16 Load Range E |
| Wheels - Option Two | 16 " x 6 " (40.6 cm x 15.2 cm) |
| Brake Type | Standard electric or optional hydraulic |
| Trailer Light Type | LED |
| OTHER OPTIONS | |
| Special Paint | Optional |
| Extended Warranty | Optional |
| Preventive Maintenance | Optional |
Copyright © 2026 - All Rights Reserved - EquipmentLocator.com